You asked: How much horsepower does a 360 engine have?

The 360 featured an 8.7:1 compression ration and 255 horsepower at 4,400 rpm. Its torque was 360 ft.

How much horsepower does a stock 360 engine have?

What are the specs of the Ford 360 engine? The Ford 360 engine is a V8 engine created between 1968 and 1971 with two barrels had 215 horsepower at 4,400 rpm and a max torque of 327 at 2,400 rpm. The later model, which ran from 1972 until 1975, had 196 horsepower at 4,000 rpm and 327 max torque.

How much horsepower can a 360 make?

After-market support for the 360 is great, and with the right parts, it can easily make 450 horsepower and still have great street manners. If you need more inches, it’s easy to drop in a stroker crank and get 406 cubic inches.

Is a 360 a Dodge motor?

The 5.9 Magnum is a naturally aspirated 5.9L V8 engine that was produced by Chrysler from 1992 up until 2003. With 360 cubic inches of displacement, the engine is also commonly referred to as the 360 Magnum. In 2003 the 5.9 Magnum was replaced with the 5.7L Hemi V8.

THIS IS EXCITING:  How long does a Cosco carseat last?

How much horsepower does a 360 5.9 have?

The 360 was a 5.7L V8 engine produced and designed by Chrysler from 1971 through 2002. The engine underwent several major design changes during its 31-year production run, and the Magnum edition of the engine in 1993 was a 5.9L V8 that produced 250 horsepower and 345 ft. -lbs. of torque.

Is a Ford 360 a big block?

Is a 360 Ford a big block? – Quora. Yes it is, although the typical Ford produced ~5-5.8l units were small blocks the FE 360 is actually a standard FE 390 (6.4l) big block engine block using a destroked crank from the 352.

How much HP does a 360 Magnum have?

With a high lift cam and single plane intake, the crate Magnum 360 cu in (5.9 L) was rated at 380 hp (283 kW) with the Magnum heads. Later models equipped with “R/T” or aluminum cylinder heads produced 390 hp (291 kW).

Is the 360 a Hemi?

The Origins of the Chrysler 360 V8 to 5.7 Hemi. … An upgrade came in 1998 shifting the 5.7-litre Magnum from a 230 horsepower engine up to 245, but this was insufficient for the needs and the entire Magnum line was replaced by the well-regarded Hemi engines.

How much horsepower can a 360 Magnum make?

The 360ci (5.9L) Magnum had a rated output between 230 and 250 hp. Nevertheless, engineers underestimated its role as a hard-working truck engine, and its thin-deck cylinder heads often had problems with cracking and warping—especially when run on low-octane fuel.

How reliable is Dodge 360?

Being known as one of the motors that have been known for a considerably long time since the motor was first made in 1992 and last seen in production in 2003, the motor has been considered extremely reliable. The motor is actually known as the 360 magnum.

THIS IS EXCITING:  How will electric cars affect electricity generation?

How much horsepower does a 5.9 have?

By 2007, the 5.9 Cummins offers an impressive 325 horsepower and 610 lb-ft. A large part of the power improvements were due to the 4-valve per cylinder design and electronic engine management. *12v 5.9 Cummins are also known as the 6BT while 24v diesel engines are the ISB 5.9.

How much HP can a 5.9 Magnum handle?

Magnum 5.9 engines commonly carried a rating of 245 horsepower, with the tiny factory hydraulic roller camshafts delivering a hair over . 400-inch lift.

How much horsepower does a 5.7 Hemi have?

5.7L HEMI® V8

The 5.7L V8 HEMI® engine is available only on the R/T trim This engine offers 370 horsepower with 395 lb-ft of torque. With this powerful HEMI® upgrade, you’ll get a 0-60 mph of 5.2 seconds and a ¼ mile time of 13.7 seconds.

How many liters is a 350 engine?

The 350 cu in (5.7 L), with a 3.48 in (88.39 mm) stroke, first appeared as a high-performance L-48 option for the 1967 Camaro.